|
|
|||||||
|
Is it within the scope of Webuser to make an article up showing the types of slots on a motherboard and the pitfall of fitting different value Cards in the same slots (as with RAM) I personally fell foul buying a PCI graphics Card then finding out it was as a PCI-express slot needed (different motherboard) So I'll have to continue with my old AGP slot card for a few weeks (pre 2004)and find either an AGP or PCI specfic card with 512MB to fit ...PC Dealer will just say its a PCI slot without you knowing about these other slot types with the same name and the "E" or Express suffixes only when you try fitting it you'll see the difference ![]() There are some other PCI suffixes which are not as common so the standard for this 1 slot is a real muddle
|
||||||||
|
|
|||||||
|
I would like to add my halfpenny worth. I too do not know how to distinguish between the PCI slots. I fitted a card purportedly to extend my USB2 hubs by 4 and it worked for about 1/2 an hour, now nothing! There is little detail for the inexperienced on the net as to the procedures and the relevant details about PCI slots, so I for one would appreciate some written information. Regards, Peter. |
||||||||
|
|
|||||||
|
See what I said here, "Building your own PC?" the same answer applies here too. http://www.webuser.co.uk/forums/showflat.php/Cat/0/Number/359348/an/0/page/0#359348 |